antenna register
| SWITCH_MAP_SEL_8F | switch antenna map selection 8 to f |
| SWITCH_MAP_SEL_07 | switch antenna map selection 0 to 7 |
| EXT_ANTENNA_NUM | user programmed switch antenna number |
| EXT_ANTENNA_NUM_WEN | user programmed switch antenna enable |
| BUFFER_BP | when high, bypass buffer, and not write/read buffer for datapath power test |
| TEST_TD_POWER | when high, test rfe,td detector power, other module don’t work, the cordic work or not decided by resampler_bp |
| TEST_FD_POWER | when high, test rfe, cordic and fd detector power, other module don’t work |
| TEST_SYNC_POWER | when high, test rfe. Cordic and sync power. Other module don’t work |
| TEST_RFE_CORDIC_POWER | when high, test rfe and cordic power, other module don’t work |
| TEST_RFE_POWER | when high, test rfe power, other module don’t work |
| ADC01_SAMPLE_TIME | when high, will exchange the adc0/adc1 sample time, to avoid the error sample time for adc0/adc1 |
| PHY_RATE_MUX | ble data rate used in datapath, 0: 1mbps 1: 2mbps |
| PHY_RATE_REG | user programmed phy data rate |
| PHY_RATE_WEN | 0: phy rate comes from ble ip 1:phy rate comes from regsiter phy_rate_reg |
| PDU_RSSI_WAIT_TIME | 0:wait 0us 1: wait 4us |
| PDU_RSSI_WIN_LEN | select estimation length for pdu rssi calculate |
| CAL_PDU_RSSI_EN | calculate rssi use pdu data enbale. |
| PROP_CRC_AA_DIS | prop mode crc check disable check access address. |
| PROP_AA_LSB_FIRST | prop mode access address lsb first for cbt test. |
| PRE_NUM_WEN | preamble number write enable |